what i said is set your base level at d3 and then go from there kind of as budget and needs dictate and you can't go wrong
Cites price
Evidence index · Stainless Steel Cookware
Only claims about stainless steel cookware made by people we have grounds to call cookware reviewers. The unrestricted stainless steel cookware evidence is on the stainless steel cookware page.
cookware reviewers is an occupation.
13 people on record as cookware reviewers make 544 quoted claims about stainless steel cookware across 42 sources. Membership is recorded with its own evidence — for a person by the trait they are on record holding, for a community by the source it was said in — and authority is scoped to stainless steel cookware rather than to fame.
This page is the evidence, scoped to cookware reviewers. Where the full stainless steel cookware evidence adds up to a finding, it is written up separately.
Endorsements and objections about stainless steel cookware from cookware reviewers, together, strongest evidence first. There are 32 with evidence; the 15 with the most independent voices are below, and every one is in the claim search.
what i said is set your base level at d3 and then go from there kind of as budget and needs dictate and you can't go wrong
Cites price
so guess what i tried a d3 and i like it i like it a lot
Cites build quality, weight
i really do like this all clad d3 stainless steel frying pan been cooking in it heavily for about six months now so it's part of my go-to frying pan rotation it's easy to move around seems to be well made and most importantly it produces a ton of delicious food it gets a thumbs up
it's a tri-ply pan it has a stainless steel cook surface and underneath is an induction compatible stainless steel exterior in between is a thick layer of aluminum aluminum is almost as good as copper when it comes to heat conductivity
Cites even heating, heat retention, non-stick surface, size and capacity, heat conduction
what this illustrates is that the d3 has good heat conductivity that aluminum core spreads the heat really well here you can see that the okra is sizzling and frying edge to edge
the 12 inch model easily holds four boneless pork chops you could probably get a fifth in there if you wanted to and you see that the pan produces nice even browning
these stainless steel d3 actually produce nice non-stick bacon the way you get non-stick bacon in stainless steel is simply to start the bacon off in a cold pan give it an early flip and then cook it as normal and it's non-stick
i note that these two steaks are over a pound each and they fit in this 12 inch d3 nicely and the pan maintained a sear i give those a good two minutes or so on the first side look at that crust that's a very nice crust
as it heats up the oil starts flowing out to the side so there's there's an area of about that size in the middle of the pan where it gets very little oil because it's as soon as the paint heats up but just the oil just flows to the side and that is really annoying um for two reasons one is obviously well you the oil…
Two judgements rest on this sentence:
with this industry with this much lighter industry however on the same heat setting it was sort of able to maintain that sound for the third first 30 seconds or so and it didn't even do that very well because the sound that i heard was kind of half sizzling half steaming and after about 30 seconds it just started to…
the handle on the pro line both the main handle and the helper handle the finish is nicer it's polished and smooth and this one has a rougher texture
the finish on the helper handle on the industry is not as polished or um that doesn't look as premium as the pro line okay but again that's to be expected because this is the slightly lower end lower end product line
If you want to spend less or prefer lighter cookware that's a little easier to maneuver, go with Industry.
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so if you click and buy I'll earn a commission but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
With Industry, you get the same Silvinox surface treatment, rivet-less handle design, and high-quality steel as Atlantis but at a significantly lower price.
Cites price, surface finish
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so if you click and buy I'll earn a commission but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
really really good pans as I've said many times before. I still really enjoy using them even at almost 5 years.
Demeyere Atlantis is the best of the best. Each piece is carefully crafted with the highest quality materials and a thoughtful design process.
Cites build quality
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so if you click and buy I'll earn a commission but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
After the water boiled, I took each pan off the heat and measured the water temperature after 10 minutes. Demeyere Atlantis retained the most heat, again thanks to its super thick construction.
Cites heat retention
To get a second read on heat retention, I heated each pan until the center reached 400 degrees Fahrenheit. Then, I quickly removed it from the heat and measured the temperature in the center of the pan after 5 and 10 minutes. While the All-Clad, Made In, and Hestan pans performed similarly, the Demeyere Atlantis pan…
so in summary like i said in the beginning of at the beginning of the video my choice very clearly without a doubt the prolonged seven okay and that's and that's also because i like heavy pants i don't mind it
Cites weight
but um but what would i personally recommend um if you really don't want the 30 big heavy proline seven my first choice my first alternative would actually be the 28 centimeter per line set okay
Quoted earlier on this page. Hear it at 10:04.
so if you like a thicker heavier stainless steel Skillet one with a lot of thermal mass that produces delicious food and you don't mind getting out your wallet this de Meyer Proline Atlantis is a fantastic choice
Two judgements rest on this sentence:
Uncle Scott earns commission on this. Stated in the source: “Current Demeyere Proline Prices:* https://amzn.to/3Tbt0ng (Uncle Scott's Affiliate Link)” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Hestan and Heritage Steel had marks that looked similar, but when I ran my finger over them, they were completely smooth. There were no grooves or any real damage.
Cites rust resistance, scratch resistance
Prudent Reviews earns commission on this. Stated in the source: “We may earn a fee if you buy via the affiliate links below (at no extra cost to you). As an Amazon Associate I earn from qualifying purchases.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Hestan, Heritage Steel, and Taima all had noticeable circular rub marks, but no actual scratches.
The titanium pans didn't show any signs of pitting.
their handle starts off skinny towards the bottom and gets a little wider in the middle but then tapers off and I actually prefer that for my hand It just fits my hand really really well
Cites handle
Heritage Steel's titanium line is really exceptional cookware
this is a review of the Heston copper bond 10 piece set the most premium cookware I have ever cooked with
this is definitely my dream cookware set
cooking with Heston copper bond has been a dream everything cooks so evenly when I turn down the heat the pan immediately reacts
Cites acid resistance, even heating, flavour impact, heat control
also the stainless steel material allows me to cook acidic ingredients without a metallic taste
And if speed, responsiveness, and control are important to you, the CopperBond collection is the best performer in Hestan’s lineup.
Cites heat control, heating speed
Quoted earlier on this page. Hear it at 5:32.
Cites rust resistance, scratch resistance
Prudent Reviews earns commission on this. Stated in the source: “We may earn a fee if you buy via the affiliate links below (at no extra cost to you). As an Amazon Associate I earn from qualifying purchases.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Go with Hestan NanoBond if you want a lighter, more responsive pan with high-end features.
Cites heat control, weight
But if you have the budget and want to splurge on cookware that maintains its original appearance for a very long time, Hestan NanoBond is one of the best you can buy.
Cites appearance, scratch resistance
The Fissler Original-Profi had only a 4° difference between the center and the edge. That's not just better than every pan in this group—it's the most even heat distribution I've ever measured, and I've tested over 60 brands.
Cites even heating, heat retention
However, there is now a new benchmark. After 5 minutes, the Fissler Original-Profi was still at 176°F—17° hotter than Demeyere.
If you're looking for a stainless steel pan that heats evenly and retains heat well, Fissler Original-Profi is the best you can buy.
The Fissler Original-Profi is a disc bottom pan, but the disc is nearly 7 mm thick, which makes it the thickest pan I tested. And because of its thickness, it has the best heat retention of any pan in the group, and the temperature difference between the center and the outer edge was essentially zero.
Cites even heating, heat retention
These pans have thin steel walls but a massive 7 mm thick base that spreads heat more evenly than any pan I've ever tested. There was only a 4-degree difference from the center to the edge after 2 minutes of preheating.
Cites even heating, heat retention
It also retains heat the best—even better than Demeyere.
So, if money is not a factor, Demeyere Atlantis Proline and Hestan NanoBond are the best overall. Go with Demeyere for the heat retention and excellent induction performance.
For years, Demeyere Atlantis has been the benchmark for this test. At 159°F, its thick 5.5 mm walls consistently held heat better than any stainless steel pan I've tested.
Cites heat retention
If you’re okay living with that risk, this collection is definitely worth it.
These handles are similar to Made In handles, except they fork right before the body of the pan to disperse heat and keep the handle cool.
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links, so I'll earn a commission if you click and buy, but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
There's a small bump underneath to warn you when your hand is getting too close to the heat.
I strongly prefer the flatter design of the Eater series handle because it's less likely to rotate but is still comfortable.
I haven't had any issues with pitting with the Eater Series, so while that is an advantage for the Titanium Series, it hasn't become an issue with the other pan.
Cites build quality, country of manufacture, durability, rust resistance
Overall, these are two high-quality pans that are made in America. They're both durable, well-made, high performing, and will last a lifetime.
In the $100 to $200 range, Made In, All-Clad D3 Everyday, and Heritage Steel Eater Series are the safest long-term buys. I've used all three for years and they consistently perform great.
So is Made In cookware worth buying? In my opinion, yes.
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so I'll earn a commission if you click and buy but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Made In is not cheap, but it's significantly less expensive than brands like All-Clad, Demeyere, and Hestan.
Cites country of manufacture, price, warranty
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so I'll earn a commission if you click and buy but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Fortunately, they offer a generous 45-day return policy so if you get it in the mail and you don't like it you can return it.
But the best part about Made In is that the prices are fair. It's not the most affordable brand, but for quality fully-clad stainless steel cookware that's made in the United States and Italy, it's an excellent value.
If you're looking for lightweight pans, you'll be disappointed. Made In pans are built solid with thick heavy walls. The 12-inch fry pan weighs over three pounds.
Cites build quality, durability
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links so I'll earn a commission if you click and buy but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
It's exactly what you want in stainless steel cookware. It heats up fast and evenly, retains heat well, has large comfortable handles, an attractive brushed exterior, and it's built to last.
If you’re looking for high-end stainless steel cookware that will last, Hestan ProBond is a solid investment.
Cites durability
Applying approximately 5 pounds of pressure, I rubbed the rough side of a Scotch-Brite sponge on the inside of the ProBond pan for 10 seconds. As you can see, the sponge left behind a very noticeable rough patch of micro scratches.
The knife made a significant gouge in the ProBond pan. It also scratched the NanoBond pan but the damage wasn't as bad.
I repeated this test on the bottom of the pan, and the results were the same - The ProBond scratch was significant, and the NanoBond scratch was noticeable but not as deep.
But if you don’t care about sealed rims and flush rivets, it’s not worth the high price.
Cites price (against)
Under $100, Cuisinart MultiClad Pro is the clear winner. It has one of the best handles, a wide cooking surface, sealed rims, and the performance is solid.
Cites base and rim, handle, size and capacity
Cuisinart is best known for its small appliances like food processors and toasters, but their MultiClad Pro cookware collection is one of the best low-cost stainless steel options.
Prudent Reviews earns commission on this. Stated in the source: “Those are affiliate links, so I'll earn a commission if you click and buy, but at no extra cost to you.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
The main handle has a groove on top for your thumb that locks the pan in place so it doesn't rotate when you tilt it. It's one of the most comfortable and secure handles I tested.
Cites handle
It had one of the smallest temperature differences between the center and the outer edge of any pan I tested, so it heats really evenly.
Cites even heating
The Fissler M5-Pro Ply is a solid five-ply pan made in Germany with a brushed exterior, sealed rims, and no rivets.
Cites base and rim
Fissler M5 and Demeyere pans have sealed rims, so the core layers are not exposed.
Cites base and rim
Heritage Steel's rivets stick out a little bit more than Made In's rivets, so they're a little bit more likely to collect oil and grime.
Cites ease of cleaning
Prudent Reviews earns commission on this. Stated in the source: “Disclaimer: We may earn a fee if you buy via the affiliate links below (at no extra cost to you). As an Amazon Associate I earn from qualifying purchases.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Although they have some major differences, both pans are well-made, durable, high performing, and will last a really long time.
I haven't noticed pitting with either of these pans, but it's nice to know that Heritage Steel provides a little extra protection.
Cites build quality, durability, rust resistance
Prudent Reviews earns commission on this. Stated in the source: “Disclaimer: We may earn a fee if you buy via the affiliate links below (at no extra cost to you). As an Amazon Associate I earn from qualifying purchases.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
The stainless steel pan heated the fastest, which wasn't surprising since its core layers are aluminum and aluminum conducts heat fast.
Cites even heating, heating speed, heat resistance
Prudent Reviews paid by this brand. Stated in the source: “Before I show you that, I want to thank Made In for sponsoring this video.” Kept and labelled rather than dropped: a paid endorsement is still evidence, and you should be the one to decide what it is worth.
Thanks to its relatively thin construction, the carbon steel pan wasn't far behind.
The stainless steel pan cooked the pancake fast and evenly, carbon steel heated quickly but one side of the pancake cooked more than the other, and the cast iron pan heated so slowly that the pancake wasn’t close to done when the timer went off.
In fact, the Made In carbon steel pan is safe up to 1200°F.
Not a recommendation for a specific product: technique, materials and what to look for in stainless steel cookware. Citable on its own terms. There are 61 of them; the 40 with the strongest evidence are below.
cast iron doesn't necessarily get really piping hot for example stainless steel gets extremely hot and can shoot up to a really high temperature really fast
Cites acid resistance (against), heat control (against), heating speed (against), heat retention (against), learning curve (against), maintenance (against), non-stick surface (against), rust resistance (against)
it takes a while to get to operating temperature because it's so densely packed it takes a while to cool down
so that translates in if you need to adjust your temperature you better adjust it well in advance because you can easily burn your food if you realize that your temperature's set too high and you want to lower it the skillet's going to take a while to adjust
so dialing in your temperatures and adjusting during your cooks can get pretty tricky with cast iron there's a bit of a learning curve
and with cast iron and carbon steels you do have to be very careful with how you do clean them at the end of your cooks you need to wash them and then completely dry them on the stovetops and lubricate them before storing them every single time or you do run the risk of getting rust and you definitely don't want that
another big thing with cast iron skillets and carbon steel skillets as well is that they tend to react with acidic foods
i feel like cast iron skillets don't tend to react as much as carbon steel skillets do
they don't retain heat as well as cast iron skillets but that also means that they don't share any of those negatives
but the biggest con of stainless steel skillets is yes they do stick
but it does stick you don't believe me try making scrambled eggs it can be done you have to put a lot of oil on there and it's a lot more work you have to be very mindful to temperatures
the biggest cons of stainless steels however are they stick they stick like crazy they're not as forgiving if you make mistakes
i mean they get hot really quickly they cool down really quickly but if you're not paying attention you can either put your food in when the skillet's not necessarily hot and boom now you've just created a really sticky mess or you'll get distracted and you've burnt your food really quickly
but other than that the two biggest cons are the price and they're not as nonstick as carbon steel and stainless steel
and she definitely loves the carbon steel skillets but i don't think she likes to do that extra step at the end you know completely drying them off and cleaning them
okay the first skillet that we should talk about and is probably the most budget-friendly skillet and really hard to beat especially if you're starting off as a chef is the cast iron skillet
Cites acid resistance, flavour impact, learning curve, price, searing and crust, versatility
cast iron can fry cast iron can sear a really mean steak they can saute vegetables you can make pizza in cast iron you can bake in cast iron it will literally do everything pretty well
cast iron skillets are relatively cheap and propel you into that pro level category will make you into a better cook because they do have a learning curve but the learning curve is really all the fundamentals of cooking so once you've mastered cooking on a cast iron skillet you've basically mastered cooking
if you're looking to make sauces out of the fond fond is basically the leftover sticky bits that are left on stainless steel skillets you can make a sauce out of that by adding wine or a chicken or beef broth or whatever broth that you want to use
just like cast iron carbon steel can be used for almost anything i've made pizzas in it i've baked i've cooked and seared amazing steaks in it you can saute in it and you can even make sauces
stainless steel skillets can literally cook anything acidic foods meats proteins you can bacon them you can do anything you want with stainless steel skillets
but they do one thing extremely well and that's fond if you want to make an amazing sauce stainless steel skillets are for you
i tend to use mine mainly for italian dishes or something where i know i want to make a sauce right after and that's what stainless steel skillets are really good at
but i have gotten rid of all my cast iron skillets ironically i've given them away to friends and family that are that had just started cooking and how you know i've actually moved on to carbon steel
but it can make anything i mean a stainless steel skillet can make a great steak
One of my main takeaways from these tests is that the entire cooking surface needs to be above a certain temperature for the Leidenfrost Effect to occur consistently. When the outer edges of the cooking surface aren't as hot as the center, the water will evaporate.
Cites even heating, non-stick surface
Cool spots, like the ones I caused by repeatedly dropping water intp the pan, also have an impact.
So, after watching the tests over and over again, and with the considerations I just mentioned, I believe in the context of stainless steel cookware the Leidenfrost Effect begins around 420°F or 215°C.
But if you're measuring from the center of the pan, aim for approximately 430°F or 221°C to ensure the entire pan is hot enough.
The stainless steel pan had noticeable scratches that I could feel with my fingernail.
Cites rust resistance (against), scratch resistance (against)
Heritage Steel, Taima, and the stainless steel pan all came out with noticeable scratches.
The stainless steel pan ended up with circular scratches that were deep and I could feel with my fingers.
The stainless steel pan had small dark spots starting to form, and at first I just thought this might be mineral buildup, so I cleaned it with vinegar and Bar Keepers Friend. But the spots didn't come off. They hadn't corroded through the surface yet, but it was the beginning of pitting.
After the second and third rounds, more spots appeared on the stainless steel pan. And when I zoomed in, I could see that they were actually starting to eat into the steel. When I rubbed them with my fingernail, I could feel the indentation.
Don't buy pans with what are called encapsulated or clad bottoms. The layers are only on the bottom of these cheaper, thinner pans.
Cites build quality (against)
What happens is those heat up very slowly because they're really thick and so then you turn up the heat and then they acquire heat and they hang onto it and everything's burning
Cites even heating (against), heating speed (against)
After many years of testing cookware, we decided to focus only on sets made of fully clad stainless steel.
Cites build quality
From our years of testing, we also know that fully clad cookware construction is tough, it's durable, and it cooks more evenly without hotspots.
Cites durability, even heating
I mean you could really honestly just get away with one 12in stainless steel pan I mean you could use this for small jobs you could use it for large jobs so if you really wanted to save money and just get one pan to do pretty much every job your 12-in stainless steel frying pan or Skillet is the way to go
Cites price, versatility
so now for my Allstar picks of what if I had to start over what would I buy I would go with a 12-in fry pan
Maintaining stainless steel cookware is much easier. Since it’s not reactive and won’t rust easily, you don’t need to season it.
When aluminum or copper is bonded only to the base, the sides of the cookware don’t heat as evenly.
Cites ease of cleaning (against), even heating (against), flavour impact (against), heat conduction (against), heating speed (against), heat retention (against), non-stick surface (against)
Because cast iron pans are thicker than stainless steel, and cast iron has a lower thermal conductivity than the materials used as the core layers of stainless steel cookware, it heats slower.
If a cast iron skillet is too big for the burner, food in the middle will cook faster than the edges, as you can see with these chicken cutlets.
The water in the stainless steel pan started boiling after 2 minutes and 55 seconds, and the water in the cast iron pan started boiling after 3 minutes and 34 seconds.
Don’t get me wrong, stainless steel pans, especially good quality fully clad pans, retain heat well, but not at the same level as cast iron.
Also, cast iron tends to absorb the flavor of the food you cook. So fish and other pungent ingredients can linger in the skillet and impact your next meal if you don’t clean it thoroughly.
However, because it’s not coated and doesn't have a layer of seasoning baked into the surface, foods like eggs are more prone to sticking.
The one major problem with stainless steel cookware is food sticking. It’s easy to ruin eggs, and cleaning sticky stainless steel pots is no fun.
however one brand's five ply cookware might not be thicker than another brand's three-ply cookware. So don't assume that cookware with more plys is always thicker.
Although these pans are technically made of five layers, they have the same materials therefore the same performance as pans marketed as three ply.
Two judgements rest on this sentence:
By bonding these materials together, you get the best of both worlds: a super durable pan that heats up fast and evenly.
Two judgements rest on this sentence:
I have both of those other those other things they are wonderful to cook with
Cites non-stick surface
and also in the care section you'll find that there are ways to make your stainless steel cookware very nonstick into efficient it's just absolutely amazing
Delicate foods like eggs and fish are prone to stick, but if you preheat the pan, add enough oil, and allow the food to cook for a few minutes before you touch it, it will naturally release from the pan.
Cites non-stick surface (against)
one of the pans sadly warped by the end of testing, and just a little bit.
Cites durability (against)
In our experience, more layers, more ply, it's not great because sometimes that either means the pan is very heavy and really heavy cookware is kind of discouraging to use
Cites build quality (against), weight (against)
And this is also really prone to falling off with thermal shock and impact.
Cites durability (against)
Now, because stainless steel is on the surface layers, these pens won't rust or react with acidic food and there's no coating to wear away. There's almost no maintenance and they can last a lifetime.
that's to me most households could get away with just those three to four pots and pants I really do believe that there's probably not much else that most households these days need in order to accomplish their the majority of their cooking requirements
still what do we really really need a 12-in skillet two to three pots I mean that's really all we really need
Since stainless steel is lighter, it is easier to manipulate. You can toss food, flip burgers, and move pans easily between the cooktop and oven.
Cites ergonomics, weight
frankly like if all you've got is a stainless steel pan at home go for it you're going to get a phenomenal outcome albeit it might be a little bit more graded in terms of its doneness than doing it in cast iron
Cites even heating (against), searing and crust
on the stainless steel we've got 450 at certain parts we've got 380 at others so it looks like it's a little bit less even of a heat
Cites even heating (against)
one of the things i was a little bit worried about with the stainless steel was just how uneven the heat in the actual pan was
putting the the slight temperature degree difference aside it does look like there was a little less evenness in the cook you can see a lot more pink in these center slices than the two at the edge relative to the cast iron pan
so stainless steel skillets are a bit more pricier
Cites price (against)
however stainless steel skillets usually come in at about a hundred bucks this three ply all clad stainless steel skillet it's usually 110 but you can find it on sale on amazon for around 100 bucks
With a $200 budget, you could buy a quality stainless steel pan that will last forever and an affordable non-stick pan just for eggs and still have $100 left over.
Cites durability, price
However, for people with nickel allergies, the situation is more concerning. Studies have shown that doses of nickel as low as 67 micrograms per day can cause skin reactions.
Cites safety (against)
It doesn’t contain forever chemicals, and it's not reactive like aluminum
Cites acid resistance, safety
The bottom line is that for most people, stainless steel is one of the safest types of cookware.
but stainless steel cookware doesn't have to stick if you use it correctly make sure to heat it up slowly cook correctly and take care of it you should have no problems with food sticking
Cites maintenance, non-stick surface
With stainless steel and cast iron, it’s possible to justify that type of investment because those materials can last forever, but not with non-stick.
Cites durability
cookware with a steel core like All-Clad D5 will heat slower.
Cites heating speed (against)
And they're all clad construction, and we know that means that there are different layers of metal bonded together. And the center is gonna be aluminum, which heats up really quickly. It's very responsive.
Cites heat conduction, heat control
The stainless steel pan I ran through the same test started developing dark spots after the first round that I couldn't remove with vinegar or Barkeeper's Friend. By the third round, those spots were starting to eat into the steel, and I could feel the indentations with my fingernail.
Cites rust resistance (against)
The good news is that these studies use extreme conditions like 20-hour simmer times. Unless you have a known allergy to nickel, the actual risk is extremely low under normal cooking situations. So from a health perspective, stainless steel is a great option.
Cites heat resistance, non-stick surface, safety, safety
Carbon steel is the thinner, lighter version of cast iron. It's made from about 99% iron and 1% carbon. And like cast iron, it's durable, it can handle extremely high temperatures, and it's naturally non-stick when well seasoned. It's widely considered one of the safest cookware materials.
Stainless steel cookware has no chemical coating. It doesn't rust or corrode, and it won't noticeably affect the taste of food. Because of that, it's considered one of the healthiest cookware materials. However, it's not perfect. Scientific studies show that small amounts of nickel and chromium can leach from these…
Cites safety (against), safety (against), safety, coating, rust resistance, safety (against)
Cast iron is made of about 98% iron and 2% carbon, and it's considered one of the safest cookware materials. However, studies show that small amounts of iron can leach into food, especially when cooking acidic ingredients or simmering for long periods.
There are some reports that the enamel on vintage pieces made before the 1970s may contain lead, but modern enameled cast iron from trusted brands is safe and doesn't come with any health concerns.
It's not so much great at that nice sear, that crisp that you want like with a burger, or a steak, or a crisp tender vegetable. Perfectly acceptable burger. But I think the cast iron and the carbon steel did a little bit better.
if you wanted to save space on your stove while cooking mint multiple things that's where your 8 in and your 10 in come into play
And since the materials and construction of stainless steel pans can vary significantly across brands, the performance varies too.
Cites build quality (against)
This is called the Leidenfrost Effect, and it's the key to preventing foods like eggs from sticking to stainless steel pans.
Cites non-stick surface
The stainless steel pan without any titanium needed a spatula to loosen the egg, but it still released fine.
Two judgements rest on this sentence:
The Heritage Steel and stainless steel pans stuck the most. But the pancakes still came out fine.
And even the stainless steel pan released fine.
Computed only from claims about stainless steel cookware by people we have grounds to call cookware reviewers, so the axes answer “according to cookware reviewers” rather than “according to everyone”.
Domain authority
1 recommender, weighted by demonstrated expertise in stainless steel cookware. Weighted by expertise in this category, never by audience size.
Independent consensus
1 independent voice across 1 source. How many independent voices converge, unweighted.
Long-term ownership
no dated ownership reports yet. Volume and length of dated first-hand ownership reports.
Performance
3 performance claims. Claims about how well it does the job.
Value
no value claims yet. Claims about what it costs relative to what it does.
Repairability
no repairability claims yet. Claims about whether it can be maintained or rebuilt.
Community breadth
all evidence from a single community so far. How many distinct communities converge, rather than one echo chamber.
Recency of evidence
most recent evidence from 2024. How recent the evidence is. Old evidence is not wrong, just older.
Objections raised
3 negative claims, mostly ergonomics and aesthetics. How much complaint is on the record. A high figure means the drawbacks have been stated and quoted, not that the thing is worse.
These are separate measurements, not components of a score. They are never added together, and there is no overall rating, because which of them matters depends on what you are buying the thing for. An axis that says no evidence means nobody has spoken about it, not that the answer is low.